3130
1 Place the Work Bowl on a
fl at, clean, and dry surface.
Place the Blade Adapter
atop the central shaft and
push the Adapter down to
secure into place.
2 Place the Chopping
Blade onto the Blade
Adapter shaft.
3 Prep ingredients and add
to the Work Bowl. Remove
seeds, stems, and other
non-edible pieces. Cut large
items into 1-2 inch pieces
before processing. Do not
exceed the MAX line.
Using your
Triple Prep System:
food processing.
Using the Chopping Blade:
chop, mix, and mince food.
30
• Blades and Discs are sharp.
Handle with care by the
center plastic area.
• Do not use excessive force
to push food down the
Feed Chute with the Food
Pusher. For best results, start
your Food Processor fi r s t
before adding food into
the Feed Chute.
Using the Food Processor
inconsistent with the
instructions contained in
this User Guide may result
in bodily injury, property
damage, or damage to your
unit. To reduce the risk of
severe injury to persons or
property damage, always
keep in mind:
WARNING!
• Do not overload the Feed
Chute. Allow food to
move down the Feed
Chute naturally.
• NEVER put hands, fi ngers, or
utensils inside the Feed Chute
or Work Bowl.
• NEVER store exposed Blade
Attachments or Discs in the
Work Bowl.
• A scraper or spatula may be
used, but only when the unit is
p o w e r e d o .
nutribullet
®
Food Processor.
WARNING! Blades and
Discs are sharp. Handle
with care.
4 Place the Work Bowl onto
the unplugged Motor Base.
Twist clockwise. The Work
Bowl will click when locked
into place.
To Next Page
Loading...
