3736
9 Twist the Work Bowl
counter-clockwise to unlock
and remove it from the
Motor Base.
10 Carefully remove the
Dough Blade.
Using the Reversible Slice/Shred Disc:
slice or shred ingredients.
1 Place the Work Bowl on a
fl at, clean, and dry surface.
Place the Blade Adapter
atop the central shaft and
push the Adapter down to
secure into place.
2 Place the Slice/Shred
Disc onto the Blade
Adapter shaft.
NOTE: The Slice/Shred Disc is
reversible, with one side labeled
for shredding and the other
for slicing.
This Disc attachment can be
placed in 2 di erent positions
on the Blade Adaptor. The
lower position is for storage,
and the higher position is for
use. Hold the center knob of the
Disc, and carefully place it on
the Blade Adaptor. Align the
markings on the Disc with the
markings on the Blade Adaptor,
so that the lines connect. If the
Disc appears to be in the
lower position, remove the Disc
and rotate until the markings
line up and the Disc sits in the
higher position.
WARNING! Blades and
Discs are sharp. Handle
with care.
3 Place the Work Bowl onto
the unplugged Motor Base.
Twist clockwise. The Work
Bowl will click when locked
into place.
To Next Page
