3938
5 Plug in the Motor Base.
The Control Panel will
illuminate the food
processor menu. Select the
High setting.
6 With the motor running,
twist the Food Pusher Lid
Cap clockwise to unlock and
remove the Inner Pusher to
access the small feed chute.
Or, leave the Inner Pusher
in place and remove the
entire Food Pusher to use
the larger chute. Use the
pusher to guide ingredients
into the bowl.
4 Place the Work Bowl Lid
atop the Work Bowl. Twist
the Lid clockwise and
line up the arrows to lock
into place. Insert the Food
Pusher into the Lid’s
Feed Chute.
7 When fi nished processing,
wait until the Blade stops
rotating before twisting
the Work Bowl Lid counter-
clockwise to unlock and
remove it from the
Work Bowl.
8 Twist the Work Bowl
counter-clockwise to unlock
and remove it from the
Motor Base.
9 Carefully remove the
Slice/Shred Disc. Use a
spoon or spatula to transfer
chopped ingredients.
WARNING! Blades and
Discs are sharp. Handle
with care.
WARNING! Never use
fi ngers or utensils to push
food down the Feed Chute.
Only use the Food Pusher.
WARNING! Do not force
food down the Feed Chute.
Use the Food Pusher to
gently guide food down the
Feed Chute or allow the
food to move down the
Chute naturally.
To Next Page
