1110
or damage to the blender.
The cover must remain in
place when using the tamper
through the cover opening.
A scraper may be used but
must be used only when the
blender is not running.
• Do not use any apparatus
other than the provided
Tamper to push down
ingredients. The Tamper is
specifically designed not to
come in contact with
the blade.
• NEVER USE spatulas,
spoons, or other tools that
may contact the spinning
blade. Doing so can damage
the unit, shatter the Blending
Pitcher, or cause severe bodily
injury or property damage.
FOOD PROCESSOR
SAFETY
Proper use of your Food
Processor function is important
for the safe operation of your
nutribullet
®
. Using the Food
Processor inconsistent with
these instructions may result in
bodily injury, property damage,
or damage to your unit. To
reduce the risk of severe injury
to persons or property damage:
Blades and discs are sharp.
Handle blades and discs
carefully by the center
plastic area.
• Recipes that require certain
ingredients to be incorporated
during blending, first add
the base ingredients,
attach the Pitcher Lid, and
begin blending. Once the
ingredients are well mixed,
twist open the vented lid cap
and carefully pour or drop
ingredients into the blended
mixture. If the blended
mixture is hot or warm,
use caution and open the
vented lid cap slowly, being
mindful of escaping hot steam
or the splattering of hot
ingredients. Always reinstall
the vented lid cap when
finished adding ingredients.
• Keep hands and utensils,
other than the tamper
provided, out of container
while blending to reduce
the risk of severe injury to
persons or damage to the
blender. The cover must
remain in place when using
the tamper through the cover
opening. A scraper may
be used but must be used
only when the blender is
not running.
• ONLY USE THE TAMPER
PROVIDED with your
nutribullet
®
to push
ingredients closer to the
blade. Keep hands and
utensils, other than the tamper
provided, out of container
while blending to reduce the
risk of severe injury to persons
WARNING!
• NEVER use excessive force
on the Dual-Size Food
Pusher to push food down
the Feed Chute. This may
overheat the motor or
damage the Work Bowl. For
best results, start your Food
Processor before placing
food into the Feed Chute.
• Do not overload the Feed
Chute with ingredients that
may overheat the motor or
damage the Work Bowl. Wait
until food naturally moves
down the Feed Chute and
into the Work Bowl before
adding more food.
• NEVER put hands, fingers or
utensils in the Feed Chute
or Work Bowl. Only use the
provided Dual-Size Food
Pusher to push food down the
Feed Chute.
• NEVER place hands or
utensils near moving Blades
or Discs while processing
food to reduce the risk of
severe injury to persons
or damage to the food
processor. A scraper may be
used but must be used only
when the food processor is
not running.
• NEVER store exposed Blade
attachments or Discs in
the Work Bowl. Exposed
Blades can present a
dangerous hazard, resulting
in injury. Always cover stored
attachments with the Work
Bowl Lid.
• A scraper or spatula may be
used BUT ONLY WHEN THE
APPLIANCE IS POWERED OFF.
• Be certain cover is securely
locked in place before
operating appliance.
• Do not fill the Work Bowl
above the marked maximum
fill line to avoid risk of injury
due to damage to the cover
or bowl.
GENERAL BLADE
AND DISC SAFETY
Blades and Discs are sharp!
Handle with care to avoid
bodily injury. Non-food items
or hard ingredients may
damage the various Blades
and Discs of your nutribullet
®
.
Routinely inspect the Blades
and Discs and discontinue
use if damaged. Continued
use with damaged Blades or
Discs or use inconsistent with
these instructions may result
in bodily injury, property
damage, or damage to
your unit.
Do not touch the sharp edges
of the Blades or Discs. To
avoid laceration injury, do not
handle or touch any sharp
parts of the Blade or Disc.
WARNING!
To Next Page