NUTRIBULLET ultra - Page 12

11
was immersed in water
or other liquids.
• Do not modify the
electrical cord in any
way.
• Do not operate with
a damaged electrical
cord or plug. The
electrical cord and
plug are not suitable
for replacement.
If damaged, the
appliance should be
replaced.
• Do not allow or place
the electrical cord near
or touching any hot
surfaces, heat source,
or flame, including the
stove.
• Do not allow the
electrical cord to hang
over the edge of the
table or counter.
• Do not pull, twist, or
damage the power
cord.
• Overloading the Cup
with ice or other hard
ingredients, or use
without sucient
liquids may overheat
the motor and engage
the thermal breaker.
If the internal thermal
breaker shuts o the
motor, unplug the
Motor Base and let it
cool for an hour before
attempting to use it
again. The thermal
breaker will reset when
the unit is unplugged
and the thermal
breaker cools down.
• Always UNPLUG the
nutribullet
®
Ultra when
it is not in use, and
when assembling,
disassembling,
changing accessories,
or cleaning.
• Use of incompatible
parts or aftermarket
parts may result
in damage to your
nutribullet
®
Ultra
or create safety
hazards that may
cause personal injury
or damage. When
ordering replacement
parts always use
genuine nutribullet
®
parts and accessories.