NUTRIBULLET ultra - Page 8

7
3. Allow the Cup to cool
for at least 30 minutes.
4. After 30 minutes, check
if the Cup is completely
cooled. If still warm,
allow to cool more.
5. If cool to the touch,
slowly disengage the
Cup from the Motor
Base.
6. With the Cup pointed
away from your face
and body, use a towel
to slowly untwist the
Cup from the Rapid
Extractor Blade and
gently release any
residual pressure.
If you are still unable to
remove the Cup from
the Rapid Extractor
Blade, contact
Customer Service.
If you are unable to
untwist the Cup from
the Rapid Extractor
Blade, NEVER leave
the sealed contents out
for a prolonged period
of time. The contents
may ferment causing
the Cup to violently
WARNING!
separate, which can
result in in bodily injury
or property damage.
Dispose of the Cup and
contents properly so
you or others will not be
injured if fermentation
causes the Cup to
separate.
CUP SAFETY:
Always make sure the
Cup is securely locked
on the Motor Base
before blending. The
motor will not turn on
unless the Cup is set in
the locked position.
• Do not exceed the MAX
line. Exceeding the
MAX line can result in
leakage.
• Do not remove the
Cup while the unit is in
operation.
• Periodically inspect
your nutribullet
®
Ultra
blender components
for damage or wear
that may impair proper
function or create a
safety hazard.
WARNING!