6. Malfunction reminder
If the ice maker machine can’t detect ice drop signal for three times during ice
making process, it will show fault icon and a buzzer sound will be on at the same
time. Machine goes into fault alert status; At this point, you need to check
whether there is ice or foreign bodiesblock the ice detection plate’s turning off.
7. Self-clean mode
With the stand-by mode, keep pressing ON/OFF switch for 5 seconds, the
indicator of WORK, ICE-FULL, and ADD WATER blinking simultaneously, the
machine enters into self-clean mode; press the ON/OFF switch for 5 seconds to
exit self-clean mode.
8. Force to take off the ice pattern
In the standby mode, press the clock setting and ice type selection iconsat the
same time for 5 seconds, fault icon flashes, and go into the force to take off the
ice pattern; Again, press the ice making and ice select icons for 5 seconds at the
same time can be forced to exit to take off the ice pattern.
9. Clock and time setting function
1）Real Time Setting: Press the SET button one time, 88 hour blinking, press the
▲ button to set hour, press the SET button once again, 88 minutes flash, press
the ▲ button to set the minutes.
2）
The timing for machine start on time setting: press the SET button 3 times, 88
hour blinking, press the ▲ button
88 minutes flash, press the ▲ button to set minutes.
3）Set the machine power off time: Press the SET button 5 times, 88 hour
blinking, press the ▲ button to set hour, press the SET button once again, 88
minutes flash, press the ▲ button to set minutes.
4）
The timer functions take on use: Press ▲ to set
function mode: time power on→time power off →time off power on and off,
power on default time is 8:00, power off default time is 12:00.
5
5
To Next Page
Loading...
