Preheating.
Preheating the Air Fryer before placing food is recommended, unless
the unit is already hot from a previous cooking cycle. Preheating
saves cooking time and improves the texture of cooked foods.
1. Place Air Fryer on a stable, level, clean, heat-resistant and dry
surface, close to an electrical outlet.
2. Ensure that Air Fryer basket and basket drawer is locked into the
Air Fryer body. Plug in unit to a power outlet.
NOTE: All icons will flash then go o. Only POWER
is
illuminated.
3. Press POWER to turn the Air Fryer on. All icons will be
illuminated. Screen displays TEMP: 200 °C and TIME: 10 minutes.
Note: If no program is selected, Air Fryer will remain in standby
mode. After 3 minutes of inactivity, the Air Fryer will automatically
switch o with only the POWER illuminated.
4. Press PREHEAT . Icon blinks and displays the default TEMP: 200
°C and TIME: 03 minutes.
5. Optionally, adjust PREHEAT temperature and time using either
or .
6. If you wish to change the temperature unit from °C to °F (and vice
versa), press and hold and of TEMP simultaneously until Air
Fryer beeps and either °C or °F is illuminated.
7. Press START to begin PREHEATING.
NOTE: Once PREHEATING has started, PREHEAT icon
becomes steady and all the cooking programs are o.
8. Once PREHEATING is done, Air Fryer beeps 5 times and screen
displays READY. The temperature set blinks and time field shows
--. All icons in the control panel are illuminated.
22
To Next Page
Loading...
