Initial test run.
This step is optional but recommended in order to get yourself
familiarized with the Air Fryer. It will also help eliminate any residue or
traces of odor in the Air Fryer that may remain after shipping.
NOTE: This process must be done with no food in the Air Fryer basket.
1. Place the Air Fryer on a stable, level, clean, heat-resistant and dry
surface, close to an electrical outlet.
2. Ensure that Air Fryer basket and basket drawer is locked into the
Air Fryer body. Plug in unit to a power outlet.
NOTE: All icons will flash and then go o. Only POWER
is
illuminated.
3. Press POWER to turn the Air Fryer on. All icons will be
illuminated. Screen displays TEMP: 200 °C and TIME: 10 minutes.
NOTE: If no program is selected, Air Fryer will remain in standby
mode. After 3 minutes of inactivity, Air Fryer will automatically
switch o with only the POWER button illuminated.
4. Press under TIME to adjust time to 5 minutes.
5. Press START to begin INITIAL TEST RUN.
NOTE: No cooking programs will be displayed.
6. Once the time reaches 00, display shows End.
21
To Next Page
Loading...
