Initial set up.
1. Remove and safely discard all packaging materials and labels
from inside and outside of the Air Fryer. Ensure that there is no
packaging underneath and around the Air Fryer basket and
basket drawer.
2. Place the Air Fryer on a stable, level, clean, heat-resistant and dry
surface. Ensure there is enough space of 13 cm behind and above
the Air Fryer against the surface. Leave enough room to remove
the Air Fryer basket safely.
3. The Air Fryer is shipped with the Air Fryer basket locked into
the basket drawer, inside the Air Fryer body. Firmly grasp the
Air Fryer basket handle, slide the clear basket lock on top of
the handle forward and pull the basket drawer out; place on a
stable, level, clean and dry surface.
4. To unlock and remove the Air Fryer basket from basket drawer,
slide the clear basket lock on top of the handle forward to expose
the basket release button. Press the basket release button with
your thumb and lift the Air Fryer basket up and out of the basket
drawer.
5. Wash both the Air Fryer basket and the basket drawer using
either a dishwasher or a non-abrasive sponge. Rinse and dry
thoroughly before using.
6. Wipe the inside and outside of the Air Fryer with a slightly moist
cloth and dry with a towel.
7. Lock Air Fryer basket to the basket drawer. There are two tabs
on each side of the handle. Slide the two handle tabs into the
notches on top of the basket drawer. An audible click will sound
as the Air Fryer basket handle locks securely into place.
NOTE:
• Slide the clear basket lock back over the basket release
button to prevent accidental Air Fryer basket release.
• DO NOT press the basket release button while carrying the
Air Fryer basket as this will cause the basket drawer to drop
causing damage.
8. Put the assembled Air Fryer basket and basket drawer to the Air
Fryer.
20
To Next Page
Loading...
