EasyManua.ls Logo

Nuttall flexeserve ZONE 1000 - User Manual

Default Icon
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Questions and Answers

  • M
    Melinda ChapmanAug 7, 2025
    Why is my Nuttall flexeserve ZONE 1000 not maintaining temperature?
    • L
      louismeyersAug 8, 2025
      Several factors can cause your Nuttall Heated Shelf to not maintain temperature. If the food was placed in the shelf at a low temperature, it's best to load products as hot as possible. Also, drafts from doorways or air conditioning can lower the temperature; consider relocating the unit or adjusting the temperature settings by contacting your service provider. Finally, check if the set temperature is too low and increase it using the programmer. If the zone is not heating up, contact Customer Support.
  • K
    Kelly McdanielAug 21, 2025
    What to do if my Nuttall Heated Shelf products are not maintaining temperature?
    • B
      barnettrichardAug 21, 2025
      If the products in your Nuttall Heated Shelf are not maintaining temperature, first ensure that the food product was as hot as possible when loaded. Then, check for any drafts from open doorways or air conditioning units that might be affecting the temperature. If drafts are present, relocate the equipment. If the set temperature is too low, increase the temperature using the programmer. If the zone isn't heating, contact Customer Support.

Summary

Safety Symbols

WARNING;CAUTION

An appropriate safety instruction should be followed or caution to a potential hazard exists.

DANGEROUS VOLTAGE

To indicate hazards arising from dangerous voltages.

HEAVY

This product is heavy and reference should be made to the safety instructions for provisions of lifting and moving.

HOT SURFACE

MAINTENANCE

PROTECTIVE EARTH (GROUND)

Safety Instructions

Before Using the Equipment

Pre-use checks including power cable and glass shelf inspection, and ensuring no foreign objects are present.

Switching Off the Appliance

Installation

Site Considerations

Positioning

Moving the Unit

Electrical Connection

Equipment Configuration

Power ON;OFF

Control Panel Overview

Switching On

Individual Zones - Heating

Procedure for switching on individual zones for heating, including controller display and initial heating period.

Individual Zones - Ambient

Switching Off

Operation

Adjusting Temperatures

Guide to viewing and changing temperature set-points for each zone using the SET button and arrow controls.

Daily Cleaning

Troubleshooting

Nuttall flexeserve ZONE 1000 Specifications

General IconGeneral
BrandNuttall
Modelflexeserve ZONE 1000
CategoryHeated Shelf
LanguageEnglish

Related product manuals