nutz pro - Product Features and Setup; Key Features; Interface and Connection

3
English
I. Features:
1. Full support for any device ulizing a 2.5 mm,3.5mm, 6.35 mm and airplane
audio connector.
2. Fully Sealed shaerproof design structure.
3. Opmized headphone cavitydesign, with single speaker frequency response
adjustment, professionaly tuned to be steady and ample in bass, bright in alto
regions and crystal clear in treble, fully equipped with 40 mm neodymium iron
boron magnet moving coil speaker providing higher sensivity giving you a
pure sound without emphasizing or altering any key frequency allowing you to
listen to an arsts music as they recorded it to sound.
II. Functions of Interface:
Headset
1. 2.5 mm, 3.5 mm audio,6.35 mm and airplane connector.
III. Connection Method:
1. Connect your device using one of the above connectors, with one end inserted
into the audio connector of the CD/MP3/MP4/Airplane/Amplier/Dj Set or
other audio-visual equipment, and the other inserted into the 3.5mm audio
connector of the headphone. See the gures below.