4
Setting Up Your Phone
Follow these step-by-step instructions to set up your G2.
Power off the phone before inserting any cards!
Remove SIM Tray
• Remove the SIM tray by inserting a pin eject key/
paper clip in the small circular hole at the bottom of
the tray. The tray will then eject from the phone.
Configuration 2: microSD™ Card/SIM
• Orient microSD/SIM card to match layout on tray.
• microSD card supports up to 64GB
• SIM 2 (Nano) supports 4GLTE connections.
Configuration 1: Dual SIM Standby
• Orient SIM card to match layout on tray.
• SIM 1 (Nano) supports 4GLTE connections.
• SIM 2 (Nano) supports 4GLTE connections.
Replace SIM Tray
• After placing the SIMs and/or memory card in the
tray, slide it back into its slot. It will click and hold
in place.
Charge/Sync
• Plug in the type C connector to charge the phone or
transfer data.
1
3
2
4
5
Warning:
SIM cards are small enough to become a choking hazard, so
please keep them away from Children & Pets. SIM cards are also
quite delicate. Please be careful when handling your card.
EN
To Next Page
Loading...
Need help?
General
