Do you have a question about the NuvoMed ECG-6/0153 and is the answer not in the manual?
Provides the three primary steps for configuring the EKG monitor.
Covers package contents, features, and general notices for device setup.
Outlines essential general notices and safety guidelines for initial device use.
Details instructions and precautions related to radio frequency interference and usage.
Provides guidance on electromagnetic emissions, immunity, and RF considerations for the device.
Explains charging procedures and how to interpret battery status indicators.
Guides users on starting the device, taking measurements, and understanding the display.
Describes the PC software's purpose and provides steps for download and installation.
Details connecting the device, downloading/deleting data, and firmware upgrades via PC.
Details app compatibility, device requirements, and Bluetooth setup for the Nuvomed EKG app.
Explains connecting via Bluetooth, transferring data, and adjusting app settings.
Lists common problems encountered with the device and provides solutions.
Provides guidelines for cleaning, maintenance, transportation, and storage of the EKG monitor.
Defines various symbols used throughout the instruction manual and on the device.
Details the device's technical parameters, including environment, power, and basic measurements.
Outlines the limited warranty period, coverage, and disclaimers for the product.
Explains how to contact customer service for support and the process for repairs.
| Input Circuit Current | ≤0.1μA |
|---|---|
| Noise Level | ≤15μVp-p |
| ECG Channels | 6 channels |
| Lead Mode | 12-lead |
| Anti-baseline Drift | Automatic |
| Filter | EMG, 50/60 Hz |
| Recording Mode | Automatic/Manual |
| Paper Speed | 25 mm/s, 50 mm/s |
| Sensitivity | 5 mm/mV, 10 mm/mV, 20 mm/mV |
| Power Supply | AC: 100~240V, 50/60Hz |
| Battery | 7.4V/2000mAh rechargeable lithium battery |
| Connectivity | USB |
| ECG Analysis | Automatic |