Need help?Do you have a question about the nux Flanger Core and is the answer not in the manual?
General| Type | Flanger |
|---|---|
| Technology | Analog |
| Input Impedance | 1 MΩ |
| Output Impedance | 10kΩ |
| Controls | Depth, Feedback |
| Power Supply | DC 9V |
| Current Draw | 20 mA |
Details the 9V DC power requirement and the OUT/OUT STEREO jacks for connecting to guitar amps.
Explains the function of Rate, Width, and Depth knobs for adjusting the flanger effect parameters.
Describes the ON/OFF footswitch and the TONE LOCK toggle switch for effect activation and mode selection.
Details the Feedback knob for effect modulation and the Indicator LED for effect status.
Step-by-step guide on removing old batteries, connecting new ones, and indications for replacement.
Notes on battery life variability and the recommendation to use an AC adaptor due to high power consumption.
Illustrates how to connect the Flanger Core pedal with a guitar, amplifier, and other devices.
Provides crucial instructions on the order for turning devices on and off to prevent malfunction or damage.
Explains how to temporarily lock settings and save/recall presets using the toggle switch and footswitch.
Lists detailed specifications including presets, sampling frequency, signal processing, frequency response, and dimensions.
Outlines environmental precautions for use and lists included accessories like the owner's manual and battery.
To Next Page
