nux MFX-10 User Manual

Overview of the MFX-10's front panel controls and their functions.

Description of the MFX-10's rear panel input and output ports.

Visual guide to navigating the MFX-10's modes and functions.

Describes how to use the MFX-10 in live performance mode.

Details how to edit and create presets on the MFX-10.

How to bypass the MFX-10 effects.

Instructions for using the built-in guitar tuner.

Guide to saving custom presets and naming them.

How to use the MFX-10's drum and loop machine features.

Explains how to assign and use the expression pedal.

Details the mixer/phones output mode for recording or headphone use.

Steps to restore the MFX-10 to its original factory settings.

Guide to recalibrating the expression pedal for optimal performance.

How to connect and practice with external audio sources like MP3 players.

Details on the compressor module and its parameters like Sustain, Attack, and Level.

Explains Wah (Pedal, Touch, Auto) and Overdrive effects within the EFX module.

Explains Distortion, Phaser, and Tremolo effects within the EFX module.

Introduction to the AMP & DS module, listing various amp and distortion models.

Descriptions for AMP & DS models from Drive Off to Black Face.

Descriptions for AMP & DS models from Blues Man to 80's 100W.

Descriptions for AMP & DS models from Solo Hi Gn to Mark IV.

Descriptions for AMP & DS models from Screamer to Muff Pi.

Details cabinet models and EQ parameters for AMP and DS models.

Explains the Noise Gate module and its parameters for hiss and noise reduction.

Details Chorus, Flanger, and Vibrato modulation effects and their parameters.

Explains Stereo Tremolo, Uni V, and Pitch Shift modulation effects.

Details the Analog and Tape Delay modules and their parameters.

Introduction to the Reverb module, covering Hall, Room, and Plate types.

Details the common parameters for all Reverb module types.