DESCRIPTION
The Touch 1500-HAZ nVent RAYCHEM is a panel mounted touch screen
display used in conjunction with RAYCHEM NGC-40 and NGC-20 (Europe
only) control and monitoring devices. The Touch 1500-HAZ display is rated
NEMA 4X (IP65) and can be mounted indoors or outdoors in a hazardous
location. For outdoor installation, a space heater will be required in the panel
for low ambient conditions. The Touch 1500-HAZ kit includes all hardware
required for mounting in a suitable electrical panel. Additional materials are
required for electrical connections and are detailed below. These instructions
describe how to mount the Touch 1500-HAZ in an electrical panel and are
intended only for personnel experienced in panel construction.
TOOLS REQUIRED
• Metalle • Maskingtape
• Phillips screwdriver • #16 (3/16) drill bit
• Jig saw (recommend using carbon steel blade with 24TPI)
ADDITIONAL MATERIALS (TO BE ORDERED SEPARATELY)
Qty Catalog number Description Mfg Mfg/
PTM PN
1 Touch 1500-HAZ-TS Touch Screen TTC 10332-011
1 Touch 1500-HAZ-CPU Computer TTC 10332-010
1 Touch 1500-HAZ-CK Cables/Mounting Hardware:
4-ft USB A/B Cable
4-ft VGA Cable
Touchscreen Mounting Clips
(1) 8-ft DB9 to RS-485 Cable
TTC 10332-027
1 ADAM-4069-C1D2 Alarm Module Advantech
1 Push-to-Test Alarm Light (24 Vdc)
APPROVALS / CERTIFICATIONS
Hazardous Locations
ClassI,Division2 GroupsA,B,C,D
40JY
I.T.E. for use
in Hazardous
Locations
Touch 1500-HAZ-CPU
23BJ
I.T.E.
Hazardous location
designation
Class I, Division 2
Groups A, B, C, D, T5
Hazardous Locations
I.T.E. for use
in Hazardous
Locations
316N/23BJ
Hazardous location
designation
Class I, Division 2
Groups A, B, C, D, T4A
Hazardous Locations
Touch 1500-HAZ-TS
TOUCH 1500
User Interface Terminal for RAYCHEM NGC Systems Installation Instructions
Touch 1500-HAZ-CPU and
Touch 1500-HAZ-TS
installed in a panel
The TOUCH 1500 is an electronic unit. During installation,
take the following precautions to avoid damage to its
electronic components.
• Handle with care to avoid mechanical damage.
• Keep electronics dry.
• Avoid exposure to static electricity.
• Avoidcontaminationwithmetallings,liquids,or
other foreign matter.
• Use agency-approved conduit bushings, adapters,
and cable glands to keep the enclosure protected
fromdustanduids.
General
Area of use Nonhazardous or hazardous locations, indoor or
outdoor (Type 4X, IP66)
Supply voltage Touch 1500-HAZ-CPU: 10 – 36 Vdc
Touch 1500-HAZ-TS: 19 – 30 Vdc
Amperage rating Touch 1500-HAZ-CPU: 2 A @ 24 Vdc
Touch 1500-HAZ-TS: 2.62 A @ 24 Vdc
Operating temp (CE)* Touch 1500-HAZ-CPU: –20°C to 60°C (–4°F to 140°F)
Touch 1500-HAZ-TS: –20°C to 60°C (–4°F to 140°F)
Operating temp (UL)* Touch 1500-HAZ-CPU: –10°C to 60°C (14°F to 140°F)
Touch 1500-HAZ-TS: 0°C to 50°C (32°F to 122°F)
Storage temperature –30°C to 80°C (–22°F to 176°F)
Dimensions (W x D x H) Touch 1500-HAZ-CPU: 85.5 x 139 x 152 mm
(3.4 x 5.5 x 6 in)
Touch 1500-HAZ-TS: 422 x 68 x 338 mm
(16.61 x 2.68 x 13.31 in)
Alarm Outputs
Relay output One Form C relay rated 3 A @ 250 Vac.
Relay is used as a common alarm.
* Note: Temperature ratings are without space heaters
Network Connection
Remote Port(com 3) Connects to common alarm module (ADAM-4069)
RS-485 A non-insulated 9 pin D sub male
Data rate To 9600 to 57000 baud
Field Port(com 4) Not used
RS-485 A non-insulated 9 pin D sub male
Data rate To 9600 baud
LAN 10/100 Base-T Ethernet port with Link
and Activity Status LEDs (X3)
USB Ports USB 2.0 host ports (X4)
LCD Display
Display LCD is a 15-in XGA, color TFT
transflective device with integral LED
backlighting.
Touch Screen 5-wire resistive touch screen interface
with enhanced ITO film for user entry.
To Next Page
Need help?
General
