- 3 -
January 2010
Introduction
This manual describes the basic, initial setup of a Harmony Tegra 250 developers’ kit (devkit), and is
designed to assist a new user in understanding the hardware, selecting an operating system to install to
the devkit, and connect and configure the hardware to boot that operating system. Very little operating
system-specific information will be found in this manual, as each operating system supported by the
Harmony devkit includes its own support pack with software and documentation. This manual covers
the details that tend to cross over all supported operating systems.
What is “Harmony”?
The NVIDIA Tegra 250-based “Harmony” devkit is a compact, Smartbook-motherboard form factor
computer-on-a-board with the following specifications:
- Dual ARM Cortex A9 CPU @1GHz
- 1GB of RAM
- High-performance, shader-based 3D acceleration
- HD video encode and decode
- 512MB of Flash memory
- Onboard wired Ethernet
- WiFi
- Bluetooth
- Analog stereo audio in/out
- USB keyboard/mouse/storage support
- HDMI/DVI-D and VGA/CRT display support
- Onboard SD(HC) slot
To Next Page
Loading...