- 4 -
January 2010
Getting Started: Overview
There are a few basic steps required to begin developing for the Harmony devkit:
Unboxing:
1) Unpack the Harmony devkit components
2) Familiarize yourself with the components
Host PC Configuration:
1) Select your desired Harmony operating system
2) Download the support pack for that operating system from the NVIDIA Tegra developers
website
3) Read the documentation provided with that support pack and install it to the appropriate host
PC
4) Download and install any host PC support SW as required by the platform support pack’s
documentation
Connecting the Harmony HW:
1) Locate/procure the required hardware accessories for the Harmony (somewhat dependent
upon the selected Harmony operating system image)
2) Select the desired video output based on your available display devices and the operating
system image
Installing the Operating System to the Harmony:
1) Follow the operating system image installation instructions provided with the support pack
2) Boot the Harmony
To Next Page
Loading...