- 5 -
January 2010
Unboxing
Devkit Contents and Hardware Requirements
As shipped, your Harmony devkit should contain the following items:
• Harmony main board (rectangular circuit board containing the Tegra chip and connectors for
networking, USB peripherals, storage and display devices)
• 15V power adapter (USA 120V mains power connection)
• Adjustable, folding, threaded WiFi antenna
• Expansion board (smaller, square circuit board containing a serial port, LEDs and a few buttons)
Also required to use the Harmony devkit, but not supplied (developer must provide these):
• Host PC with USB ports. The exact OS that this host PC must be running may differ depending
upon the devkit OS to be used, but is most frequently Microsoft Windows.
• USB mini (NOT micro, as with previous Tegra devkits) to USB cable (for device setup and
connectivity)
• External display supporting VGA (15-pin D-Sub), HDMI or DVI (via HDMI-to-DVI adapter)
• SD card or USB-based “thumb drive” for additional storage
• USB mouse
• USB keyboard
Strongly recommended to use the Harmony devkit, but not supplied (developer should provide these):
• Powered USB hub
To Next Page
Loading...