State Bi-Color LED (Yellow/Green)
Beacon command for
locating the adapter card
1Hz blinking Yellow
Error
4Hz blinking Yellow Indicates an error with the link.
The error can be one of the following:
Error
Type
Description LED Behavior
I
2
C
I
2
C access to the
networking ports fails
Blinks until
error is fixed
Over-
current
Over-current condition of
the networking ports
Blinks until
error is fixed
Physical Activity Blinking Green
Link Up Solid Green
Physical Up (InfiniBand
Mode Only)
Solid Yellow
PCI Express Interface
The DPU Controller supports PCI Express Gen 5.0/4.0 through x16 edge connectors.
Some cards allow connectivity to an additional PCIe x16 Auxiliary card through the
Cabline CA-II Plus connectors.
The following lists PCIe interface features:
PCIe Gen 5.0, 4.0, 3.0, 2.0 and 1.1 compatible
2.5, 5.0, or 8.0, 16.0 or 32.0 GT/s link rate x16 lanes
Auto-negotiates to x16, x8, x4, x2, or x1
To Next Page
Loading...