Ensure GeForce
3D Vision Glasses
are Working
You must fully charge your GeForce
®
3D Vision
™
glasses for at least three hours
before using them for the first time.
You can check the battery level of your glasses
by pressing the ON button on the left temple.
If the light next to the button is green, >
you have up to 40 hours of battery
life remaining. Actual battery life is
dependent on the recharge time.
If the light is red, you have less than two >
hours remaining and it is recommended
that you recharge your glasses.
If the light does not turn on, the >
battery is drained and the glasses
must be recharged.
If you are charging GeForce 3D Vision glasses
by connecting them to your PC using a USB
cable, make sure your PC does not go into
power save mode. When your PC goes into
power save mode, GeForce 3D Vision glasses
are no longer charging. To fix this, disable any
power saving options on your PC under the
Windows Control Panel. Alternatively, you
can use a USB wall charging device to charge
the glasses directly from your wall power
outlet without connecting to the PC. You can
use your glasses while they are charging.
Ensure You
Use the Proper
DVI Cable
Make sure you use the DVI cable that was
shipped with your GeForce 3D Vision-Ready 120Hz
LCD display. This is a standard dual-link DVI cable
and GeForce 3D Vision will not operate without it.
DUAL-LINK DVI
TIPS & TRICKS
To Next Page
Loading...