Nvidia JETSON TX1 - Page 20

Jetson TX1 Developer Kit
User Guide
Jetson | Copyright © 2014 NVIDIA Corporation. All rights reserved. Page 20 of 27
This radio transmitter [FCC ID: LDKNVTX11697] has been approved by FCC to operate with the antenna types listed
below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain
greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
Ant.
Brand
Model Name
Antenna Type
Connector
1
Shanghai Amphenol Airwave
Ci8717-15-000-R
PCB Antenna
Reversed-SMA
2
Shanghai Amphenol Airwave
Ci8717-15-000-R
PCB Antenna
Reversed-SMA
3
Shanghai Amphenol Airwave
Ci8210-15-000-R-TA
PCB Antenna
I-PEX
4
Shanghai Amphenol Airwave
Ci8211-15-000-R
PCB Antenna
I-PEX
5
Shanghai Amphenol Airwave
CI9808-15-000-R
PCB Antenna
I-PEX
6
Shanghai Amphenol Airwave
CI9809-15-000-R
PCB Antenna
I-PEX
7
Shanghai Amphenol Airwave
CI9811-15-000-R
PCB Antenna
I-PEX
8
Shanghai Amphenol Airwave
CI9810-15-000-R
PCB Antenna
I-PEX
9
Shanghai Amphenol Airwave
CI9812-15-000-R
PCB Antenna
I-PEX
10
Shanghai Amphenol Airwave
CI9813-15-000-R
PCB Antenna
I-PEX
Ant.
Gain (dBi)
2.4G
BT
U-NII-1
U-NII-2A
U-NII-2C
U-NII-3
1
6.02
6.02
5.53
6.48
7.91
5.38
2
6.02
6.02
5.53
6.48
7.91
5.38
3
-2.3
-2.3
2.5
2.9
3
3.2
4
-2.1
-2.1
1.2
1.7
3.2
4.1
5
-
-
-7.8
-7.8
-6.5
-5
6
-
-
-5.9
-5.7
-4.5
-3.1
7
-
-
-6.5
-6.1
-4.1
-3.7
8
-
-
-6.1
-5.7
-4.6
-3.3
9
-
-
-6.1
-7.6
-4.8
-4
10
-
-
-6.1
-7.6
-4.8
-4
The module is limited to OEM installation ONLY.
This module is intended for OEM integrators under the following conditions:
1. This module is restricted to installation in products for use only in mobile and fixed applications.
2. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons.
3. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or
transmitter.
4. OEM integrator has be limited the operation channels in channel 1-11 for 2.4GHz band.
5. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part
15.407(a)(1)(i).