Nvidia Quadro GV100 User Manual

Page 6 | Quadro GV100 Quick Start Guide
EN
05
SOFTWARE INSTALLATION
AND CONFIGURATION
Driver Installation
With the hardware installed, it is now time to install the
graphics driver.
1 Power up your computer, start Windows or Linux, and login
with an account that has Administrator rights.
Note: Since there is no GPU driver currently loaded, the
display may run at reduced resolution or image quality.
2 Download and install the driver.
•
Select and download the Optimal Driver for Enterprise
(ODE) from www.nvidia.com/drivers.
•
Set the 'Product Type' to Quadro, and use the various
drop down menus to select Quadro GV100 and your
Operating System.
•
Launch the downloaded executable file, then follow the
installer guides to complete installation.
The installer may require you to reboot your system once
the driver installation is complete.
Congratulations! Your NVIDIA Quadro
graphics card is now ready to use!

Nvidia Quadro GV100 Specifications

General

GPU Architecture	Volta
CUDA Cores	5120
Tensor Cores	640
Base Clock	1132 MHz
Memory Capacity	32 GB
Memory Type	HBM2
Memory Interface	4096-bit
Memory Bandwidth	870 GB/s
TDP	250 W
Single-Precision Performance	14.8 TFLOPS
Double-Precision Performance	7.4 TFLOPS
Tensor Performance	118.5 TFLOPS
Display Outputs	4x DisplayPort 1.4
Interface	PCIe 3.0 x16
Max Resolution	7680x4320 @ 60Hz
Multi-Projection	Yes
VR Ready	Yes
HDMI	No
NVLink	Yes (2x NVLink, 100 GB/s)