Nvidia SHIELD P2897 - SHIELD Settings - Power and Display; Sleep Now or Restart; Sleep Timing and Screensaver

4
SHIELD Settings
Sleep Now or Restart
Sleep Now
SHIELD will automatically go to sleep after the time period set in Settings > Daydream. To immediately put SHIELD to
sleep:
1. On the SHIELD Home screen, select Power and "Sleep Now."
Restart
To restart:
1. On the SHIELD Home screen, select Power and "Restart."
2. If option 1 is unsuccessful, you can also unplug the power cord, wait 10 seconds, and then plug the power cord
back in.
Sleep Timing and Screensaver
You can set up a screensaver (Daydream) for your SHIELD that displays photos and colorful designs. Daydream uses a
collection of scenic photos.
Choose Your Screensaver (Daydream)
1. On the SHIELD Home screen, select Settings .
2. Under "Device," select Daydream .
3. Select Daydream again.
4. Choose from the available options.
Set Wait Time for Screensaver
You can choose how long it takes for your screensaver to start when not using your SHIELD:
1. On the SHIELD Home screen, select Settings .
2. Under "Device," select Daydream .
3. Select When to daydream.
4. Select one of the options.