NXP Semiconductors TDA11106 Series - Page 10

10
AGN 0~1 Gain FM demodulator 0:normal operation 1:gain
+6 dB
1
AGNE 0~3 FM sound demodulator outopt signal amplitude 1
FMWS 0~3 Window select for FM demodulator 2
FMWS INS 0~3 Window select for FM demodulator when search 0
CORING 0~1 CORING control switch 1
E2PROM CLR 0~1 E2PROM resete 0
P7
PFp4 0~3 PAL Center frequency with postpone adjust 2
PFnm 0~3 NTSC 3.58 Center frequency with postpone
adjust
1
PFn4 0~3 NTSC 4.43 Center frequency with postpone
adjust
2
PFav 0~3 AV Center frequency with postpone adjust 2
Yn 0~15 Y-delay adjustment for PAL signal 9
Yp 0~15 Y-delay adjustment for NTSC signal 12
Yav 0~15 Y-delay adjustment for PAL signal in AV mode 12
Ysvhs 0~15 Y-delay adjustment for PAL signal in S-video
mode
11
P8
IF
(MONO90)
0~3
Other 0~6
Vision IF of RF
(MONO90)
0: 38.00MHz (CHINA)
1: 45.75MHz
2: 38.90MHz (EUROPE&INDIA)
3: 33.90MHz
(AV90/AV110/MONO110)
0: 58.75MHz
1: 45.75MHz
2: 38.90MHz (EUROPE&INDIA)
3: 38.00MHz
4: 33.40MHz
5. RESRVE (reserve)
6: 33.9MHz
(MONO90)
2
Other
2
DCXO 0~3 Crystal load electric capacity compensate 1
OIF
MONO90
0~15
Other 0~63
IF compensate
(MONO90)
8
Other 32
FFI 0~1 Fast filter IF -PLL 1
FS CP 0~1 FS Tuner CP Bit setting 0
AVL-MAX 0~1 Sound maximum gain Then the AVL ON 1
AVL 0~1 AVL function selection 1:on 0
AVL OPT 0~1 AVL function switch in the consumer menu 0