EasyManua.ls Logo

Nyne Adventure User Manual

Nyne Adventure
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EN
Charge the speaker until the LED light beside the
button turns solid white.
Tips:
If the LED light ashes white slowly, it
indicates that the battery is low and needs to
be recharged.
ES
Cargue el altavoz hasta que la luz LED al lado del
botón se vuelva a color blanco sólido.
Consejos:
Si la luz LED parpadea en
blanco lentamente, indica que la batería
está baja y necesita ser recargada.
EN
Press to power on.
) For rst-time use, the Bluetooth indicator ashes
blue quickly, indicating that the speaker is in
pairing mode.
Tips:
When you power on the speaker again after
Bluetooth setup, the speaker will search for the
previously paired device and the Bluetooth
indicator will ash slowly. If no paired device is
found, it will ash quickly and the speaker will
enter pairing mode.
If there is no power to the speaker after
you press the power button, check that the
speaker is connected to AC power or the
battery is fully charged.
You can hold
again to power off.
To save power, the speaker turns off
automatically after 15 minutes of inactivity.
ES
Pulse para encender.
) Cuando vaya a usarlo por primera vez, el
indicador de Bluetooth parpadea rápidamente
en azul, lo que indica que el altavoz está en
modo de sincronización.
Consejos:
Cuando vuelva a encender el altavoz
después de congurar el Bluetooth, el
altavoz buscará el dispositivo sincronizado
y el indicador de Bluetooth parpadeará
lentamente. Si no se encuentra ningún
dispositivo sincronizado, parpadeará
rápidamente y el altavoz pasará a modo de
sincronización.
Si el altavoz no se enciende tras pulsar el
botón de encendido, compruebe que el
altavoz está conectado a la fuente de CA o
que la batería está totalmente cargada.
Puede mantener presionado el botón
de
nuevo para apagar.
Para ahorrar energía, el altavoz se apaga
automáticamente después de 15 minutos de
inactividad.
EN
1
Make sure that the speaker is in pairing mode.
2
Enable Bluetooth on your device to be paired
with the speaker.
Select ‘NYNE Adventure’ from the available
devices (enter the password ‘0000’ if necessary)
to start pairing and connection with the
speaker.
3
After successful connection, the Bluetooth
indicator turns solid blue and the speaker
beeps.
Tips:
This speaker supports automatic
connection with a previously paired device
after power-off and power-on again.
You can press and hold
for more than 2
seconds to enter manual pairing mode. In this
way, you can pair the speaker with a new
Bluetooth device.
You can press and hold
for more than 8
seconds to clear all paired Bluetooth devices.
ES
1
Asegúrese de que el altavoz está en modo de
sincronización.
2
Active la opción Bluetooth en su dispositivo
para sincronizarlo con el altavoz.
Seleccione ‘NYNE Adventure’ entre los
dispositivos disponibles (introduzca la
contraseña “0000” si es necesario) para iniciar
la sincronización y la conexión con el altavoz.
3
Cuando se ha conectado, el indicador
Bluetooth se vuelve de color azul sin parpadear
y el altavoz emite un pitido.
Consejos:
Este altavoz permite realizar
una conexión automática con un dispositivo
previamente sincronizado tras apagarlo y
volverlo a encender.
Puede pulsar
durante 2 segundos para
pasar a modo de sincronización manual. De
este modo, podrá sincronizar el altavoz con
un nuevo dispositivo Bluetooth.
Puede pulsar
durante 8 segundos para
borrar todos los dispositivos Bluetooth
sincronizados.
EN
Play music on your device paired and connected
with the speaker.
During music play:
Press +/- to adjust volume.
Press to skip to the previous or next
song.
Press to pause or resume music play.
When you make a call or there is an incoming call,
you can use the speaker as a speaker phone.
When there is an incoming call, you can press
to receive the call.
During a call, you can press
to end the call.
Tips:
Music play is paused during a call
and resumed automatically when the call
ends.
You can press and hold
to disconnect
the current Bluetooth connection.
ES
Reproduzca música en su dispositivo sincronizado y
conectado con el altavoz.
Durante la reproducción de música:
Pulse +/- para ajustar el volumen.
Pulse para pasar a la canción anterior
o la siguiente.
Pulse para pausar o reanudar la
reproducción de música.
Cuando realice o reciba una llamada, puede
utilizar el altavoz como manos libres.
Cuando reciba una llamada, pulse para
responderla.
Durante una llamada, puede pulsar para
nalizarla.
Consejos:
La reproducción de música
se pausa durante una llamada y se reanuda
automáticamente cuando naliza la llamada.
Puede mantener pulsado
durante unos
segundos para desactivar la actual conexión
Bluetooth.
Adventure
All registered and unregistered trademarks are
property of their respective owners.
Nyne Multimedia Inc.
All rights reserved.
QUG-Adventure-06-06-2017-V1.0
nyne.com
NYNE Adventure
2
1
Quick User Guide
Guía rápida del usuario
Portable Bluetooth Speaker
Altavoz Bluetooth portátil
ES
EN
ES
EN
EN
1
Connect an auxiliary audio device to the
speaker through the 3.5mm audio port.
2
Play and control music on the audio device,
and use +/- on the speaker to adjust volume if
necessary.
Tips:
When the 3.5mm audio cable is
plugged in, the speaker switches to LINE IN
mode automatically. When it is unplugged,
the speaker switches back to Bluetooth mode
and connects with the previously paired
device automatically. If no device is available,
the speaker enters pairing mode.
During playback, you can press
to pause
or resume sound output.
ES
1
Conecte un dispositivo de audio auxiliar al
altavoz utilizando el cable de audio de 3,5 mm.
2
Reproduzca y administre su música en el
dispositivo de audio y utilice +/- en el altavoz
para ajustar el volumen si es necesario.
Consejos:
Cuando conecte el cable
de audio de 3,5 mm, altavoz pasa
automáticamente a modo de entrada
auxiliar. Cuando se desconecta, el altavoz
vuelve a modo Bluetooth y se conecta
automáticamente al dispositivo previamente
sincronizado. Si no hay dispositivos disponibles,
el altavoz pasa a modo de sincronización.
Durante la reproducción, puede presionar
para pausar o reanudar la salida de sonido.
NYNE Adventure - QUG_V1.0_20170606.indd 1-4 6/6/2017 3:57:56 PM
Question and Answer IconNeed help?

Do you have a question about the Nyne Adventure and is the answer not in the manual?

Nyne Adventure Specifications

General IconGeneral
BrandNyne
ModelAdventure
CategorySpeakers
LanguageEnglish

Summary

Charging the Speaker

Charging Indicator

LED light status for charging and low battery indication.

Powering On and Off

Power On Indicator

Bluetooth indicator behavior during power on and pairing.

Auto Power Off

Speaker automatically turns off after 15 minutes of inactivity.

Bluetooth Connectivity

Pairing and Connection

Steps to pair and connect your device via Bluetooth.

Automatic Connection

Speaker automatically connects to previously paired devices.

Manual Pairing Mode

Enter manual pairing mode to connect new devices.

Clear Paired Devices

Clear all previously paired Bluetooth devices.

Music Playback and Calls

Playback Controls

Adjust volume, skip tracks, and pause/resume music.

Call Handling

Use speaker as speakerphone for incoming calls.

Call Disconnect

End calls and disconnect Bluetooth connection.

Line In Audio Input

Connecting Auxiliary Devices

Connect audio devices using the 3.5mm audio port.

Mode Switching

Automatic switching between Bluetooth and Line In modes.

Device Charging

Mobile Device Charging

Charge your mobile device using the 5V 1A USB socket.

Important Safety Information

Electrical Shock Precautions

Warnings and precautions to avoid electric shock.

Fire and Heat Warnings

Precautions against fire hazards and excessive heat exposure.

Operation and Maintenance

Instructions for safe installation, use, and cleaning.

Ventilation and Environment

Guidelines for proper ventilation and avoiding environmental hazards.

Repair and Service

Instructions regarding professional repair and avoiding self-service.

Regulatory and Compliance Notices

Modification Notice

Warning regarding unauthorized modifications to the device.

FCC Compliance

FCC statements on interference and radiation exposure limits.

Recycling and Disposal

Information on recycling packaging and disposing of used batteries.

Technical Specifications

Related product manuals