Nyos TORQ User Manual

3.2.
1.
4.
(Fig. 4)
(Fig. 2)
3.
1.
(Fig. 3)
Filling with two filter media (only TORQ
®
Body 1.0
and Body 2.0)
1. Turn body upside down and remove screen
insert and separating screen
2. Add filter media to the top chamber
3. Insert filter sponge without hole and and sepa-
rating screen. Add second filter media, hold the
acrylic stick firmly while doing so.
4. Close the body by fitting the screen insert
General Information
• The groove in the acrylic tube and the lug
on the screen insert must sit on top of each
other during assembly (Fig. 2)
Step 02 Filling the TORQ
®
Body
Filling with one filter media
1. Remove lid
2. Only body 1.0 and 2.0: Remove separating
screen
3. Add filter media and put the lid back on

Nyos TORQ Specifications

General

Brand	Nyos
Model	TORQ
Category	Aquariums
Language	English