(Fig 1)
Removal position
Setting the flow rate
(Fig. 5)
NYOS
®
TORQ
®
QUICK START
Step 01 Positioning the TORQ
®
Dock in the sump
• In sump use only
• Avoid contact to side panes
• Only plug in, when the body is on the
dock
Full instructions and safety information
Video instructions and tips
Step 03 Insert TORQ
®
Body and start operation
1. Fit the body on the dock in the removal position
(Fig. 5)
2. Plug in the dock
3. It is possible to change the flow rate by rotating
the body.
4. Set the flow rate so that the filter media will be
hold in suspense
NOTE: A smear layer will form after a few days.
This will result in a quieter return flow and bubble
formation will reduce.
Manufactured by
Nyos
®
Aquatics GmbH,
Siemensstr. 26,
70825 Korntal-Muenchingen, Germany
www.nyos.info, info@nyos.info
EN
To Next Page
Need help?
General
