Need help?Do you have a question about the NZXT Kraken Elite 360 RGB and is the answer not in the manual?
General| Type | All-in-one liquid cooler |
|---|---|
| Fan diameter | 120 mm |
| Fan speed (max) | 1800 RPM |
| Fan speed (min) | 500 RPM |
| Maximum airflow | 78.86 cfm |
| Quantity per pack | 1 pc(s) |
| Suitable location | Processor |
| Maximum air pressure | 2.57 mmH2O |
| Fan noise level (max) | 33.88 dB |
| Pump motor speed (max) | 2800 RPM |
| Pump motor speed (min) | 800 RPM |
| Compatible processor series | AMD Ryzen 3, AMD Ryzen 5, AMD Ryzen 7, AMD Ryzen Threadripper, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9 |
| Supported processor sockets | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1700, Socket AM4, Socket AM5, Socket sTR4, Socket sTRX4 |
| Fan's mean time to failure (MTTF) | 60000 h |
| Pulse-width modulation (PWM) support | Yes |
| Material | Aluminium, Plastic |
| Display type | TFT-LCD |
| Fan connector | 4-pin |
| Product color | Black |
| Number of fans | 3 fan(s) |
| Radiator material | Aluminum |
| Display size (HxV) | 60 x 60 mm |
| Illumination color | Multi |
| Water block material | Copper/Plastic |
| Package type | Box |
| Fan current | 0.2 A |
| Pump current | 300 mA |
| Pump voltage | 12 V |
| Fan power consumption | 2.4 W |
| Tube material | Rubber |
Weight and Dimensions| Weight | 1620 g |
|---|---|
| Tube length | 400 mm |
| Package depth | 146 mm |
| Package width | 488 mm |
| Package height | 186 mm |
| Package weight | 2460 g |
| Radiator depth | 27 mm |
| Radiator width | 394 mm |
| Radiator height | 121 mm |
| Waterblock width | 81.9 mm |
| Waterblock height | 59.5 mm |
| Fan dimensions (W x D x H) | 120 x 120 x 26 mm |
Adjust Intel backplate sliders for socket compatibility.
Install the Intel backplate onto the motherboard rear.
Install four socket standoffs from the motherboard front.
Remove stock AMD bracket, keep original backplate.
Install four AMD sleeves onto the motherboard front.
Install four AMD standoffs onto the motherboard front.
Remove Intel bracket and install AMD bracket onto pump.
Mount fans first, then radiator using specific screws.
Mount fans between radiator and chassis using specific screws.
Connect the breakout cable to the pump.
Connect 4-pin PWM fan cable to fan splitter.
Connect pump 3-pin to motherboard CPU_FAN or AIO_PUMP.
Connect USB connector to motherboard USB 2.0 header.
Connect pump SATA power cable to SATA power connector.
Details warranty duration and proof of purchase requirements.
Specifies coverage for original consumers only.
Lists exclusions like accidental damage and unauthorized modifications.
Limits liability for incidental or consequential damages.
States no other warranties are implied.
Provides contact info for support.
Device compliance with EU directives.
Statement of conformity with UK regulations.
Product compliance with RoHS regulations.
To Next Page
