Name: O Audio 500W BASH
Brand: O Audio
Rating: 5 (1 reviews)

To Next Page

To Previous Page

O Audio 500W BASH

Subwoofer Amplifier User’s Manual page 7 of 13

INSTALLATION (continued):

Cutout dimensions are 10.75”H x 9”W.

Electrical connections to the subwoofer amplifier consist of the AC mains input, low

level audio input, and speaker output.

AC mains connections are simply made with the provided AC cable. One end of the

provided cable (IEC320 style receptacle) plugs into the connector located on the

amplifier faceplate – the other end, into a 15A or 20A three-pronged North American

AC receptacle. The amplifier is designed to operate on 120VAC, 60Hz.

Please note that an AC fuse is part of the AC inlet connector. Should the fuse blow,

remove AC power from the unit; then, determine and clear the source of the problem

(such as shorted speaker output). With AC power removed, replace the blown fuse

with the same fuse as specified on the faceplate silkscreen. Replacing the fuse with

a value other than that shown on the faceplate silkscreen will void the warranty.

Low level audio inputs are made via RCA connectors.

In the final installation location, please assure that air can flow freely over the

faceplate.

Questions and Answers:

Need help?

Do you have a question about the O Audio 500W BASH and is the answer not in the manual?

O Audio 500W BASH Specifications

General