O Audio 500W BASH
®
Subwoofer Amplifier User’s Manual page 8 of 13
Copyright © 2005
INSTALLATION (continued):
Speaker connections are made to two spade connectors as shown in the following
two photos. Positive and negative are silkscreened onto the PCB under the spades.
Suitable crimp lugs have been provided with the amplifier. Do not connect the
amplifier to drivers or driver combinations that are less than 4Ù (based on the driver
nominal rating). Refer to the last Caution on page 3 for more information.
To Next Page
Loading...
