What to do if my O.K. Chainsaw has poor cutting performance?
If your O.K. Chainsaw has poor cutting performance, several factors could be responsible. The chain might be blunt, in which case you should sharpen it. Also, verify that the chain is fitted correctly and that the chain tension is properly adjusted.
What to do if my O.K. EKS 1840/1 chain becomes hot?
If the chain on your O.K. Chainsaw is getting hot, it's likely due to a lubrication issue. Check the oil level and ensure that the chain lubrication is functioning correctly.
Why doesn't the motor run on my O.K. EKS 1840/1?
If the motor of your O.K. Chainsaw isn't running, the issue could be related to the electricity supply or the chain brake. Check the socket, cable, and plug to ensure they are working. If the cable is damaged, have it repaired by Customer Service; do not use insulating tape to patch it. Damaged switches should also be replaced by a Customer Service workshop. Also, check the chain brake.
What to do if my O.K. EKS 1840/1 chain does not move?
If the chain on your O.K. Chainsaw isn't moving, the chain brake might be engaged. Check the chain brake and release it if necessary.
What to do if my O.K. EKS 1840/1 Chainsaw works only with difficulty and the chain jumps off the sword?
If your O.K. Chainsaw is difficult to operate and the chain keeps jumping off, the chain tension may be the problem. Check the chain tension and adjust it as needed.
Explains the meaning of the warning triangle symbol for safety instructions.
Provides advice on proper handling, stability, and usage of the chainsaw.
Explains the procedure for proper chain tensioning and checks.
Details how the chain brake works and how to release it.
Details methods to avoid kick-back, including proper sawing techniques and posture.
Offers instructions and warnings for the safe felling of trees.
To Next Page
General