O.S. engine FS-26S User Manual

8
Hold model securely when starting
9 Setting the throttle
10 Heat glowplug
Starter
Assistant should hold
the model so that it
cannot move forward
when the engine starts.
Be careful not
to be hit by propeller!
Fully opened
position
Fully closed
position
Set at this Position.
Starting battery
Connect battery leads as shown
(polarity is immaterial.)
11 Apply electric starter
Assistant
Glowplug battery.
Place as far to the
rear as possible.
17

O.S. engine FS-26S Specifications

General

Brand	O.S. engine
Model	FS-26S
Category	Engine
Language	English