To Next PageTo Next Page
Need help?Do you have a question about the O.S. engine FS-95V and is the answer not in the manual?
Covers events that might involve serious or fatal injury.
Covers less obvious dangers that could cause damage or injury.
Warning against over-priming to prevent hydraulic lock and engine damage.
Risk of abrupt engine restart when warm, caution with propeller flipping.
Lists standard accessories included with the engine, such as glowplug and silencer.
Guidance on choosing propellers, balancing, and safety precautions.
Information on using spinners and recommended fuel specifications.
Recommendations for fuel tank size and positioning relative to the engine.
Importance of fuel filters and appropriate tubing for fuel lines.
Lists essential tools for engine setup and maintenance.
Ensures correct mounting beam parallelism for secure engine installation.
Instructions on how to properly fasten mounting screws for beams and radial mounts.
Information on the optional radial motor mount for firewall mounting.
How to connect throttle linkage for proper control, ensuring full range operation.
Guidance on using the needle-valve extension for external adjustments.
Step-by-step instructions for installing the exhaust header pipe and silencer.
Applying sealant and adjusting silencer position for leak prevention and fit.
How to rotate the exhaust outlet of the silencer to a desired position.
Important safety warning regarding the heat generated by the engine and exhaust components.
Instructions for rinsing the fuel tank and its positioning for optimal fuel delivery.
Guidance on using silicone tubing and a pressurized fuel system.
Details on the O.S. Safety Locknut Assembly to prevent propeller detachment.
Step-by-step guide for installing the propeller and locknut.
Reminder to always check propeller tightness before starting the engine.
Advice on choosing the right glowplug and extending its lifespan.
Explanation of how the glowplug functions to initiate and maintain engine ignition.
Indicators and reasons for replacing a glowplug.
How to rotate the carburetor for different control lever positions.
Explanation of the Needle Valve and Mixture Control Valve on the carburetor.
Detailed steps for starting the engine using an electric starter.
Safety precautions when checking the glowplug element during starting.
How to safely stop the engine using the transmitter.
A step-by-step guide for breaking in the engine to ensure proper mating of parts.
Checks to perform after the initial running-in session, including vibration checks.
How to set up and operate the engine during the first flights.
What to do if the engine overheats during flight.
Steps to set the initial idle speed and check throttle response.
How to adjust the mixture control valve for optimal idle and acceleration.
Procedure to reset the mixture control valve to its standard position.
Instructions for cleaning the carburetor to prevent debris issues.
How and when to check and adjust valve clearances.
Importance of avoiding dust and debris for engine longevity.
Keeping fuel clean and using filters to prevent contamination.
Installing and cleaning in-line fuel filters.
How fuel type, especially nitromethane, affects the engine.
Risks of lean settings, overheating, and internal rusting.
Procedures for draining fuel and storing the engine properly.
Detailed steps for storing the engine for extended periods.
Diagram showing the exploded view of engine components.
A detailed list of all engine parts with their corresponding numbers and codes.
Diagram showing the exploded view of carburetor components.
A detailed list of carburetor parts with their corresponding numbers and codes.
Details on the optional radial motor mount accessory.
Information on the propeller locknut set for spinners.
Details on optional in-cowl exhaust header pipes.
Information on the optional Super Filter accessory.
Details on the booster cable set for single cylinder engines.
Information on the non-bubble weight accessory.
Details on the optional valve adjusting tool kit.
Information on the long socket wrench with plug grip.
Details on the booster terminal kit accessory.
Information on the needle valve extension cable set.
Lists key technical specifications like displacement, bore, stroke, RPM, and power.
Provides a detailed three-view drawing with dimensions of the engine.
Covers events that might involve serious or fatal injury.
Covers less obvious dangers that could cause damage or injury.
Warning against over-priming to prevent hydraulic lock and engine damage.
Risk of abrupt engine restart when warm, caution with propeller flipping.
Lists standard accessories included with the engine, such as glowplug and silencer.
Guidance on choosing propellers, balancing, and safety precautions.
Information on using spinners and recommended fuel specifications.
Recommendations for fuel tank size and positioning relative to the engine.
Importance of fuel filters and appropriate tubing for fuel lines.
Lists essential tools for engine setup and maintenance.
Ensures correct mounting beam parallelism for secure engine installation.
Instructions on how to properly fasten mounting screws for beams and radial mounts.
Information on the optional radial motor mount for firewall mounting.
How to connect throttle linkage for proper control, ensuring full range operation.
Guidance on using the needle-valve extension for external adjustments.
Step-by-step instructions for installing the exhaust header pipe and silencer.
Applying sealant and adjusting silencer position for leak prevention and fit.
How to rotate the exhaust outlet of the silencer to a desired position.
Important safety warning regarding the heat generated by the engine and exhaust components.
Instructions for rinsing the fuel tank and its positioning for optimal fuel delivery.
Guidance on using silicone tubing and a pressurized fuel system.
Details on the O.S. Safety Locknut Assembly to prevent propeller detachment.
Step-by-step guide for installing the propeller and locknut.
Reminder to always check propeller tightness before starting the engine.
Advice on choosing the right glowplug and extending its lifespan.
Explanation of how the glowplug functions to initiate and maintain engine ignition.
Indicators and reasons for replacing a glowplug.
How to rotate the carburetor for different control lever positions.
Explanation of the Needle Valve and Mixture Control Valve on the carburetor.
Detailed steps for starting the engine using an electric starter.
Safety precautions when checking the glowplug element during starting.
How to safely stop the engine using the transmitter.
A step-by-step guide for breaking in the engine to ensure proper mating of parts.
Checks to perform after the initial running-in session, including vibration checks.
How to set up and operate the engine during the first flights.
What to do if the engine overheats during flight.
Steps to set the initial idle speed and check throttle response.
How to adjust the mixture control valve for optimal idle and acceleration.
Procedure to reset the mixture control valve to its standard position.
Instructions for cleaning the carburetor to prevent debris issues.
How and when to check and adjust valve clearances.
Importance of avoiding dust and debris for engine longevity.
Keeping fuel clean and using filters to prevent contamination.
Installing and cleaning in-line fuel filters.
How fuel type, especially nitromethane, affects the engine.
Risks of lean settings, overheating, and internal rusting.
Procedures for draining fuel and storing the engine properly.
Detailed steps for storing the engine for extended periods.
Diagram showing the exploded view of engine components.
A detailed list of all engine parts with their corresponding numbers and codes.
Diagram showing the exploded view of carburetor components.
A detailed list of carburetor parts with their corresponding numbers and codes.
Details on the optional radial motor mount accessory.
Information on the propeller locknut set for spinners.
Details on optional in-cowl exhaust header pipes.
Information on the optional Super Filter accessory.
Details on the booster cable set for single cylinder engines.
Information on the non-bubble weight accessory.
Details on the optional valve adjusting tool kit.
Information on the long socket wrench with plug grip.
Details on the booster terminal kit accessory.
Information on the needle valve extension cable set.
Lists key technical specifications like displacement, bore, stroke, RPM, and power.
Provides a detailed three-view drawing with dimensions of the engine.
General| Type | 4-stroke |
|---|---|
| Practical RPM | 2, 000 |
| Glow Plug | OS #8 |
| Fuel | 15% Nitro |
| Recommended Propeller Size | 14x4 |
