37
“Walk assist” mode
1- Hold down button Y until the assist icon
appears then release
2- Gently push the bike whilst holding down the
same button.
Assist will stop when you release button Y.
3- Press button X to quit assist mode.
Using the bike
1. Switch on the bike by pressing the ON/OFF
button located on the display, on the battery or
on the frame.
• Do not put your feet on the pedals when you
are switching on the bike. This may cause a
system error.
• The power supply cannot be activated when
charging.
2. Choose your preferred assistance mode.
3. Assistance starts when the pedals start to turn.
4. Change your assistance mode depending on your cycling conditions.
5. Turn o the bike when you are no longer using it.
Steep slope Gentle slope or fl at surface Long distance on fl at surface
ON/OFF
To Next Page
Loading...