14
FM Radio Settings
In FM mode, press the MENU button on the unit (Ref.3) or on the remote control (Rem.15)
to open FM settings. Use the Vol/Enter/Stop dial (Ref.6) or the Previous/Next buttons on the
remote control (Rem.7/16) to scroll through the following options: Scan Setting Select
whether you would like to scan for all stations, or for stations only with strong signal. Once
selected, the screen will display “Strong stations only?”. To scan only for stations with
strong signal, select “YES” with the Vol/Enter/Stop dial or the OK button on the remote.
Audio Setting All stereo stations are reproduced in stereo; for weak stations this can result in
poor audio quality. The audio quality in FM mode can be improved by using mono. Select
whether to listen to the audio in stereo or mono. Once selected, the screen will display
“Listen in Mono only?” to listen in Mono, select “YES”. To listen in Stereo, select “NO”.
System Settings - Select option to open system settings. Main Menu - Select to open
available modes on the system. Scroll through using the Vol/Enter/Stop dial or the buttons
on the remote, and select your chosen mode to play from.
FM Station Information
Whilst playing a FM station, the following station information can be viewed by pressing
the ‘Info/Menu’ button repeatedly (Ref.3) on the unit. Programme Information: Displays
artist and song currently being played on the station. PTY (Programme Type): Shows the
type and description of the programme provided by the DAB station. Frequency: Displays
the station transmission frequency. Today’s Date: Displays the date information provided by
the broadcaster.
To Next Page
Loading...