Oakley HOLESHOT - Subsequent Time and Date Adjustment

TO ADJUST THE TIME AND DATE FOR SUBSEQUENT SETTINGS,
USE THESE SHORT PROCEDURES
TO SET THE TIME
1. Pull the crown out to the second click position (b).
2. Turn the crown until you reach the correct time.
3. Push the crown back down.
TO SET THE DATE
1. Pull the crown out to the first click
position (a).
2. Turn the crown until you reach the
correct date. If the current time is
between 9 PM and midnight, set the
date to the following day. (This is
necessary to ensure the date display
will normally change at midnight
instead of 12 noon.)
3. Push the crown back down.
04 HOLESHOT INSTRUCTION MANUAL
A
B
Button A
Chronograph
1/10 Second
Chronograph
Minutes
Seconds
Chronograph
Second Hand
Button B
Date
Crown