Oakley JUDGE II - Judge II Operation - Chronograph Second Time Total; Measuring a Second Time Total

04 JUDGE
®
II INSTRUCTION MANUAL
USING THE CHRONOGRAPH
POS A POS B
Button B
Button A
Hour hand
p1
Chrono
minute hand
Chrono hour
hand
Minute hand
Chrono second hand
Crown
Button B
Button A
p4
AB
Button B
Button A
p5
Button B
Button A
p2-3
Chrono
minute hand
Chrono
hour hand
Chrono second hand
TO MEASURE A SECOND TIME TOTAL:
1. Press button “A” to start timing.
2. Use button “B” to pause the chronograph hands
as desired.
3. While the chronograph hands are moving, press
button “B” to display the first time total.
Although the chronograph hands are no longer mov-
ing, time is still being measured.
4. Press button “A” when you reach the moment for
marking the second finishing time, then press but-
ton “B” to display the second time total.
5. Press button “B” to reset the chronograph hands to
the zero position.