SYMBOL IDENTIFICATION
• How to Care for Your Upholstery
SYMBOL
IDENTIFICATION
4
DIRECTIONS FOR USE
DIRECTIONS FOR USE
ADJUSTING HEIGHT OF THE TABLE:
The table comes complete with a multifunctional hand control that
operates the backrest and leg rest positioning functions as well as a foot
control that operates the height with electronic ease. These controls
should not be used simultaneously but individually to ensure safety
and complete ease of use.
Foot Controls:
Operate the foot control as shown below to raise or lower the height
of the Celesta Gemini
™
. The foot control allows the therapist to adjust
the height function separately from the other functions found on the hand-
control whenever needed. When operating the table’s controls, be sure to
observe all cautions and warnings as given in the manual.
When operating the
controls be sure to observe all
cautions and warnings given
in the manual to prevent injury
to both operator and client.
CAUTIONS
When operating the controls
and making any and all
adjustments to the table, move
hands, feet and controls away
from any working mechanisms
of the table.
Children must be supervised
when around this equipment
by a responsible adult. Do not
leave children alone or allow
them to operate the controls.
Do not allow children to crawl
into the cabinet or under the
table.
Foot Control (1):
(used only to change height of table)
UP
DOWN
CAUTION
DO NOT use the hand
control and the foot control
simultaneously as this can
cause damage to one or
both units.
IMPORTANT
• Foot Control
To Next Page