EN
17
How to proceed:
1. Screw the adapter onto the pump.
– Ensure that the O-ring is correctly seated.
2. Screw the unit onto the adapter.
– When fitting, ensure that the arrow on the cover and the outlet of the unit point in the di-
rection of the water flow.
3. Connect the unit to the downstream line.
NOTE
Ensure that all connection lines are completely leak-tight, as leaking lines can impair the function
of the system and lead to damage.
Use a suitable sealant to seal the threads of the lines and the connection to the pump.
Overtightening of plastic screw connections can lead to damage. Do not apply excessive force.
To Next Page
Loading...
Need help?
General
