Why is the delivery rate insufficient in my Oase Water Filtration Systems?
If you notice an insufficient delivery rate in your Oase Water Filtration System, several factors could be responsible. First, check if the impeller is blocked and clean it if necessary. Also, a soiled leaf basket or filter pad can cause this issue, so ensure they are clean. Lastly, inspect the injector for any blockages and clean it accordingly.
Provides an introduction to the SwimSkim operating instructions and product.
Explains the meaning of symbols used in the manual for electrical voltage and general danger warnings.
Details the product's proper application in garden ponds and lists restrictions on fluids and usage.
Alerts users with pacemakers about the potential effects of the unit's magnetic field.
Step-by-step guide for assembling and placing the SwimSkim unit in the pond.
Instructions for connecting the power supply and initiating the SwimSkim operation.
Guidance on regular cleaning tasks to ensure optimal performance of the SwimSkim unit.
Procedures for storing the unit during cold periods and checking for damage.
Guidelines for environmentally responsible disposal of the SwimSkim unit.
Solutions for common problems such as the unit not running or insufficient water flow.
Details on model number, electrical requirements, pump capacity, and physical dimensions.
Information on water resistance (IP rating), operating temperatures, and safety advisories.
General| Guarantee | 2 Years |
|---|---|
| Material | Plastic |
| Rated voltage | 230 V / 50 Hz |
| Power cable length | 10.00 m |
| Type | Skimmer |
| Connection | 1.5" |
To Next Page
