Do you have a question about the Oaxis myFirst Camera 3 and is the answer not in the manual?
Brand | Oaxis |
---|---|
Model | myFirst Camera 3 |
Category | Digital Camera |
Language | English |
Insert the Micro SD card into the slot in the correct direction as shown.
Press and hold the Power button to turn the camera on/off. Tap it as the Return button after booting.
Press the Lens-Switcher button to switch between the front and rear camera.
Press and hold the Up or Down button to enter Macro mode. Press again to exit.
Tap the Shutter button for a photo or hold for 2 seconds to start recording.
Press the Down button to enter playback mode for browsing photos and videos.
Use Left/Right buttons to browse files. Press Shutter to play videos.
Use Up for deletion menu, Shutter to confirm, Power to cancel.
Tap Shutter to zoom in, Power to zoom out when browsing photos.
During zooming, hold Left, Right, Up, or Down buttons to adjust position.
Tap Up to enter settings menu, Left/Right to choose options like date, language, sound, formatting.
Press Shutter to confirm selection; press Power button to cancel.
During photo-taking, use Left/Right to select modes like frames, continuous shooting, self-timer, filters, grid.
In different camera modes, press the Power button to return to standard camera mode.
In self-timer and continuous shooting, press Up to change durations.
The camera automatically shuts down after one minute of inactivity.
Low battery requires MicroUSB charging. Red light indicates charging; off when full.
Do not disassemble. Press pin inside reset hole to reset camera if not working correctly.
Do not drop, squeeze, or expose the camera to water to avoid damage.
Glossary of icons for timer, shots, and continuous shooting modes.