This document is an instruction manual for the Obaby Grace Mini Cot Bed, a versatile piece of nursery furniture designed and manufactured in the UK. The manual provides essential information for assembly, safe usage, and maintenance of the cot bed.
Function Description:
The Obaby Grace Mini Cot Bed serves as a sleeping solution for infants and young children. It is designed to transition from a cot to a cot bed, accommodating the child's growth from infancy up to approximately 4 years of age. The cot bed features multiple mattress base positions, allowing for adjustment as the child develops. The lowest base position is recommended as the safest once the baby can sit unaided. The product is intended for domestic use and can be dismantled for storage or transportation.
Important Technical Specifications:
- Compliance: Conforms to BS EN 716:2017 and BS 8509:2008 + A1:2011 safety standards.
- Recommended Mattress Size: Obaby Mattress Size 120 x 60 cm.
- Mattress Dimensions: The mattress should be no more than 30mm shorter or narrower than the internal length or width of the cot bed.
- Internal Height (Mattress to Cot Frame):
- At least 500mm when the base is in the lowest position.
- A minimum of 200mm when the cot base is in the highest position.
- Age Range (Bed Mode): Up to 4 years of age.
- Materials: Constructed from wood, a natural material that will darken with age.
- Assembly Fittings: Includes various screws (P1: 40mm x4, P2: 65mm x12, P3: x4) and a cot bed base support (P4: x1). An Allen key is provided for assembly.
Usage Features:
- Convertible Design: Transforms from a cot to a cot bed, extending its usability as the child grows.
- Adjustable Base Positions: Allows for multiple mattress height settings to ensure safety and convenience at different stages of the child's development. The lowest position is crucial once the child can sit unaided.
- Safety Warnings: The manual emphasizes several critical safety points:
- Assembly must be carried out by a competent adult.
- Only one mattress should be used.
- Avoid placing the cot bed near heat sources (electric bar fires, gas fires), windows, or other furniture.
- Ensure no parts are broken, torn, or missing, and use only manufacturer-approved spare parts.
- Do not leave anything in the cot bed or place it close to other products that could provide a foothold or present a danger of suffocation or strangulation (e.g., strings, blind/curtain cords).
- Children should be kept away during assembly due to potential injury risks.
- The cot bed should not be placed too close to other furniture or windows, blind cords, curtain pulls, or other strings/cords. It should either be placed tight to any wall or have a gap of 300mm between the wall and the side of the bed.
- All assembly fittings must be properly tightened to prevent injury from loose screws or trapped body parts/clothing.
- Transition to Bed Mode: To prevent falls, the cot should be converted to bed mode as soon as the child is able to climb out of the cot.
Maintenance Features:
- Routine Care:
- Clean the cot bed using only a mild detergent and warm water.
- Do NOT use bleach.
- Do NOT use any abrasive substances.
- Regular Checks: Periodically inspect the cot bed for loose screws and worn parts. Replace or adjust parts as needed to maintain safety and functionality.
- Product Updates: The manufacturer reserves the right to change product specifications due to constant updating and improvements. In case of discrepancies or need for assistance, users are advised to contact their Obaby retailer.
- Storage/Transportation: The cot bed is designed to be dismantled for ease of storage or transportation.
Need help?
General
To Next Page
