12. Please use the included battery and charger.
Otherwise, explosion may happen.
13. Adhere to laws and regulations, respect people’s
privacy and legal rights, during operating this device.
Precautions On Using This Device
The ignition switch should be OFF while plugging or
unplugging the diagnostic connector.
Precautions for ECU Operation
1. Do not disconnect the inner consumer when the
ignition switch is on. High voltage transients may
encounter at the moment of disconnecting, which
may damage the sensors and the ECU.
2. Keep the computer away from magnetic object.
3. Do cut off the power supply of ECU system before
welding on the vehicle.
4. Pay more attention to the ECU and the sensors
when the operation is next to them.
5. Ground yourself when you disassemble PROM,
otherwise, ECU and sensors will be damaged by static
electricity.
To Next Page
Loading...