14
RECORDING A SONG (CONT.)
----------------------------------------------------------------------------
You can revise the listing in a song by repeating the steps in
example 13. If there are already sequences contained in the song
the display will display the sequence contained in the first part.
You may move through the song list by using the forward and reverse
arrows to get to the part of the song that you wish to revise. You
have three editing options:
REPLACE
You can REPLACE any sequence currently displayed
with another simply by entering the new sequence
number.
INSERT
By pressing RECORD and EDIT, the DMX will insert
sequence 00 into the song list before the sequence
previously displayed. You can then REPLACE sequence
00 with the desired sequence by entering its number.
ERASE
By pressing ERASE and EDIT, the DMX will remove the
displayed sequence from the song list.
Example 14: Re-editing Song 00
OPERATION: PRESS: DISPLAY READS:
----------------------- ----------------------- ----------------
Access Song Mode SONG SELECT SONG 00
Access Edit Mode EDIT PART 1= SEQ 01
Advance to the next
Part > PART 2= SEQ 02
Advance to the next
Part > PART 3= SEQ 01
Replace Sequence 01
with Sequence 05 PART 3= SEQ 05
Advance to the next
Part > PART 4= SEQ 00
Advance to the next
Part > PART 5= SEQ 00
---------------------------continued-----------------------------
To Next Page
Loading...
Need help?
General