A
Alyssa BrownJul 27, 2025
What to do if my OBH Nordica SEASON device does not seal the vacuum bag after the vacuum process?
- DdrossJul 27, 2025
If your device isn't sealing the vacuum bag after the vacuum process, it might be because sufficient pressure wasn't achieved. Check the sealing unit's Teflon strip for dirt and clean it. Inspect the gaskets, remove them for cleaning if needed, and replace them if damaged. The vacuum bag may also leak; check it by sealing it with a little air and lowering it into water to check for bubbles. You can also try to reseal the bag or use a new one. Also, ensure that dirt or liquids in the bag opening can make it difficult to seal the bag. Open the bag and wipe off around the opening before it is placed level over the sealing unit.