Firmware Upgrade Overview
Firmware Upgrade
➀ During the upgrade, the yellow and blue lights will flash alternately.
➁ After a successful upgrade, the status indicator light changes to normal operating mode.
You can connect to the App to check the upgrade results.
➂ If the upgrade fails, the light will turn red, and the camera will emit a beeping sound.
Upgrade via Obsbot Start App
Connect the OBSBOT Tail 2 to your phone via Obsbot Start App. The App will give you an
upgrade notice when you are due an upgrade. Then follow the App instructions to upgrade.
Upgrade via OBSBOT Center
Connect the OBSBOT Tail 2 to OBSBOT Center. If a firmware update is available, you will receive
a prompt. Please follow the instructions to proceed with the update.
Content is subject to change without notice. User can download latest Quick Start Guide on
https://www.obsbot.com
Using a Micro SD Card to Upgrade
Please download the latest upgrade package on OBSBOT's ocial website. Unzip the upgrade
package and copy the .bin file to the Micro SD card root directory. Insert the Micro SD card into
your Tail 2. Once Tail 2 reads the Micro SD card, it will restart and upgrade.
⚠ Before upgrading, make sure the camera battery is at 15% or higher.
⚠ After completing the upgrade, you can check the result through the .txt file in the Micro SD
card root directory.
To Previous Page
Loading...