SETUP INSTRUCTIONS
1.
3.
4.
1. Remove contents from packaging. Lay
out deflated inflatable on a clear and flat
area with the feet of the fan touching the
ground.
Remove all plastic fasteners and tags.
These are part of the packaging and
should be discarded.
2. Zip up the zipper into the closed position,
inflatable will then fully inflate.
Locate the staking holes on the bottom
of the Air blower and insert the Air
blower stakes through the holes and into
the ground.
3. Plug into receptacle or other outlet
device to inflate your inflatable. NOTE:
complete inflation may take a few
minutes.
4. Once fully inflated, locate the Nylon
Loops on the bottom of the fabric base
and insert the spiral stakes through the
Nylon loops and into the ground.
CAUTION:
1. For even better nighttime illumination, you may choose to place an outdoor approved
spotlight in front of your inflatable. (Outdoor approved spotlight not provided). Do not
place the bulb too close to the inflatable as it may melt or damage the plastic.
2. Do not place any foreign objects inside your inflatable.
3. Do not block air intake area located on the base of your inflatable, it will decrease the
inflation time.
4. During inclement weather conditions such as heavy rains, snow and windstorms, store
the product indoors
5. Operation of your inflatable during extreme weather conditions is not recommended.
6. Do not store the inflatable when it is wet.
4
2.
P.4 49305
To Next Page
Loading...