USER SERVICING INSTRUCTION
Replace the fuse:
1. Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by
pulling on the cord.
2. Open the fuse cover. Slide opens the fuse
access cover on top of the attachment plug
towards blades. (See Illustration)
3. Remove fuse carefully.
4. Risk of fire: Replace fuse only with 5 Amp,
125V fuse (provided with product)
5. Close the fuse cover. Slide closed the fuse
access cover on top of the attachment plug.
6. Risk of Fire: Do not replace the attachment
plug. Contains a safety device (fuse) that
should not be removed. Discard product if
attachment plug is damaged.
Lamp Replacement:
1. Grasp plug and remove from receptacle or
other outlet device. Do not unplug by pulling
on the cord.
2. Open the zipper.
3. Open the protective light cover carefully by
pressing down on the two locking side tabs
simultaneously.
4. Unscrew lamp counter-clockwise.
5. Replace lamp with only same type of lamp:
C-7 lamp (one piece replacement lamp
provided) 120V, 7W maximum, candelabra
base and UL classified.
6. Do not over-tighten the lamp as this may
damage the lamp or lamp-holder.
7. Be sure all zippers on characters should be
completely closed before inflate operation
so that air does not escape.
CAUTION: Disconnect the lighting string or
decorative outfit from the outlet before
removing a lamp and replacing it with the
ornament.
CAUTION: Replace only with same type 7
Watt Max candelabra-base UL-Classified
lamps.
CAUTION: Replace only with same type C7,
Watt Max 7W UL Classified lamps.
CAUTION: To reduce the risk of fire do not
deliberately reposition either lamp holder
contact.
CAUTION: Do not attempt to inflate your
inflatable during unusually strong winds. If it
becomes too windy for safe operation, simply
allow your inflatable to deflate and wait for
better conditions before re-inflating.
CAUTION: Protect the electric fan and power
cord from direct exposure to water. This
precaution will reduce the risk of electrical
shock. When the temperature is below 14˚F
(-10˚C), the motor may temporarily stop
running. The motor will begin functioning again
in higher temperatures.
CAUTION: To reduce the risk of fire or electric
shock, do not attempt to replace lamps or
modify string.
49305 P.5
To Next Page
Loading...